[1]
Corbin C. D., Zhiqiang John Z., Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic–thermal collector system, Energy and Buildings, Vol.42, No. 1, pp. 76-82, 2010.
|
[2]
|
Mishra R.K., Tiwari G.N., Energy and exergy analysis of hybrid photovoltaic thermal water collector for constant collection temperature mode, Solar Energy, vol. 90, pp. 58–67, 2013.
|
[3]
|
Buker M.S., Blaise M., Performance evaluation and techno-economic analysis of a novel building integrated PV/T roof collector: an experimental validation, Energy and Buildings, vol. 76, pp. 164–175, 2014.
|
[4]
|
Zhao X., Zhang X., B. Riffat S., Su Y., Theoretical study of the performance of a novel PV/e roof module for heat pump operation, Energy Conversion and Management, Vol. 52, No. 1, pp. 603-614, 2015.
|
[5]
|
Salyer I.O., Sircar A. K., Phase change materials for heating and cooling Of residential buildings and other applications, Proceedings of the 25th Intersociety Energy Conversion Engineering Conference (IECEC'90), Reno, Nevada, 1990.
|
[6]
|
Rabl A., Active solar collectors and their applications. Oxford University Press, New York Oxford, 2016.
|
[7]
|
Hegazy A. A., Comparative study of the performances of four photovoltaic/thermal solar air collectors, Energy Conversion and Management, vol. 41, No. 8, pp. 861-881, 2000.
|
[8]
|
Agrawal S., Tiwari G.N., Overall energy, exergy and carbon credit analysis by different type of hybrid photovoltaic thermal air collectors, Energy Conversion and Management, Vol.65, pp.628-636, 2013.
|
[9]
|
Dubey S., Sandhu G.S., Tiwari G.N., Analytical expression for electrical efficiency of PV/T hybrid air collector," Applied Energy, vol. 86, No. 5, pp. 697–705., 2009.
|
[10]
|
Olivares A., Rekstad J., Meir M., Kahlen S., Wallner G., A test procedure for extruded polymeric solar thermal absorbers, Solar Energy Materials and Solar Cells, vol. 92, No.4, pp. 445-452, 2008.
|
[11]
|
Agrawal B., Tiwari G.N., Life cycle cost assessment of building integrated photovoltaic thermal (BIPVT) systems, Energy and Buildings, Vol. 42, No. 9, pp. 1472-1481, 2010.
|
[12]
|
Ma F., Zhang P., Performance investigation of the direct absorption solar collector based on phase change slurry, Applied Thermal Engineering, Vol.162, 2019.
|
[13]
|
Allouhi A., Ait Msaad A., Benzakour Amine M., Saidur R., Optimization of melting and solidification processes of PCM: Application to integrated collector storage solar water heaters (ICSSWH), Solar Energy, Vol.171, pp. 562-570, 2018.
|
[14]
|
A. E Mohamed., H. M., Nabil., M. I., Mostafa, An experimental investigation of the phase change process effects on the system performance for the evacuated tube solar collectors integrated with PCMs, Energy Conversion and Management, Vol. 177, pp. 1-10, 2018
|
[15]
|
Schweiger, H., Optimization of Solar Thermal Absorber Elements with Transparent Insulation. Ph.D. Thesis, Universitat Politècnica de Catalunya, 1997.
|