1-
[1] Boller C., Staszewski W., Tomlinson G. R., Health Monitoring of Aerospace Structures: Smart Sensor Technologies and Signal Processing: J. Wiley, 2004.
[2] Thajeel H. A., Numerical modeling of infrared thermography techniques via ANSYS: Missouri University of Science and Technology, 2014.
[3] Ibarra-Castanedo C., Genest M., Guibert S., Piau J.-M., Maldague X. P., Bendada A., Inspection of aerospace materials by pulsed thermography, lock-in thermography and vibrothermography: A comparative study, in Proceeding of, 16-24.
[4] Pastuszak P. D., Characterization of defects in curved composite structures using active infrared thermography, Procedia Engineering, Vol. 157, pp. 325-332, 2016.
[5] Mabrouki F., Genest M., Shi G., Fahr A., Numerical modeling for thermographic inspection of fiber metal laminates, NDT & E International, Vol. 42, No. 7, pp. 581-588, 2009.
[6] Meola C., Carlomagno G. M., Giorleo L., Geometrical limitations to detection of defects in composites by means of infrared thermography, Journal of Nondestructive Evaluation, Vol. 23, No. 4, pp. 125-132, 2004.
[7] Choi M., Kang K., Park J., Kim W., Kim K., Quantitative determination of a subsurface defect of reference specimen by lock-in infrared thermography, Ndt & E International, Vol. 41, No. 2, pp. 119-124, 2008.
[8] Meola C., Carlomagno, G. M. Squillace A., Vitiello A., Non-destructive evaluation of aerospace materials with lock-in thermography, Engineering Failure Analysis, Vol. 13, No. 3, pp. 380-388, 2006.
[9] Lahiri B., Bagavathiappan S., Reshmi P., Philip J., Jayakumar T., Raj B., Quantification of defects in composites and rubber materials using active thermography, Infrared Physics & Technology, Vol. 55, No. 2, pp. 191-199, 2012.
[10] Zheng K., Chang Y.-S., Wang K.-H., Yao Y., Improved non-destructive testing of carbon fiber reinforced polymer (CFRP) composites using pulsed thermograph, Polymer Testing, Vol. 46, pp. 26-32, 2015.
[11] Liu Z., Genest M., Krys D., Processing thermography images for pitting corrosion quantification on small diameter ductile iron pipe, NDT & E International, Vol. 47, pp. 105-115, 2012.
[12] Bates D., Smith G., Lu D., Hewitt J., Rapid thermal non-destructive testing of aircraft components, Composites Part B: Engineering, Vol. 31, No. 3, pp. 175-185, 2000.
[13] Ranjit S., Kang K., Kim W., Investigation of lock-in infrared thermography for evaluation of subsurface defects size and depth, International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 11, pp. 2255-2264, 2015.
[14] Schuster J., Heider D., Sharp K., Glowania M., Thermal conductivities of three-dimensionally woven fabric composites, Composites Science and Technology, Vol. 68, No. 9, pp. 2085-2091, 2008.
[15] Holman J., Heat transfer, 8’th ed, New York, 1997.
[16] Yang B., Huang Y., Cheng L., Defect detection and evaluation of ultrasonic infrared thermography for aerospace CFRP composites, Infrared Physics & Technology, Vol. 60, pp. 166-173, 2013.
[17] Kurpiński M., Fidali M., Detection of Bonded Joint Defects by use of Lock-in Thermography, Measurement Automation Monitoring, Vol. 62, No. 10, pp. 333--336, 2016.
[18] Systemes D., ABAQUS 6.14 Documentation–Theory Guide, Providence, RI, 2015.
)