[1] Barannikova S. A., Li Y., Malinovsky A., Pestsov D., Study of Localized Plastic Deformation of Hadfield Steel Single Crystals Using Speckle Photography Technique, Key Engineering Materials, Vol. 683, pp. 84-89, 2016.
[2] Lindroos M. and et al., The deformation, strain hardening, and wear behavior of chromium-alloyed Hadfield steel in abrasive and impact conditions, Tribol. Lett., Vol. 57, No. 24, pp. 1-11, 2015.
[3] Limooei M.B. and Hosseini SH., Optimization of properties and structure with addition of titanium in hadfield steels, Proc. Conf. of Metal 2012, Brono, Czech Republic, pp. 1-6, 2012.
[4] Najafabadi V.N., Amini K. and Alamdarlo M.B., Investigating the effect of titanium addition on the wear resistance of Hadfield steel, Metall. Res. Technol., Vol. 111, pp. 375 - 382, 2014.
[5] Magdaluyo E.R. and et al., Gouging Abrasion Resistance of Austenitic Manganese Steel with Varying Titanium, Proc. of the World Congress on Engineering 2015, London, English, pp. 1-4, 2015.
]6[ نجف آبادی و.، مناجاتی زاده ح. و امینی ک.، بررسی تأثیر تیتانیم بر بهبود خواص فولاد هادفیلد ASTM A128-C، فصلنامه علمی پژوهشی فرآیندهای نوین در مهندسی مواد، دوره 7، شماره اول، صفحات 54 - 45، 1392.
[7] Srivastava A.K. and Das K., In-situ Synthesis and Characterization of TiC-Reinforced Hadfield Manganese Austenitic Steel Matrix Composite", Iron and Steel Institute of Japan Int., Vol.49, No.9, pp.1372-1377, 2009.
[8] Srivastava A.K. and et al., Corrosion Behaviour of TiC-Reinforced Hadfield Manganese Austenitic Steel Matrix In-Situ Composites, O. J. Metal, Vol. 5, No. 2, pp. 11-17, 2015.
]9[ مجیدی س.، خیراندیش ش.، عباسی م.، اثر آلومینیوم بر ریز ساختار و خواص مکانیکی فولاد پرمنگنز آستنیتی Fe-18Mn-0.6C، مجله مهندسی متالورژی و مواد، سال ۲۷، شماره ۲، ۱۳۹۵.
[10] Tian X. and Zhang Y., Mechanism on the effect of Al upon the γ→ε martensite transformation in the Fe-Mn alloys, J. Mater. Sci. Technol., Vol. 12, No. 5, pp. 369-372, 1996.
[11] Zuidema B.K., Subramanyam D.K. and Leslie W.C., The effect of Aluminium on the work hardening and wear resistance of Hadfield manganese steel, Metall. Trans. A, Vol. 18A, pp. 1629-1639, 1987.
[12] Abbasi M. and et al., On the comparison of the abrasive wear behavior of Aluminum alloyed and standard Hadfield steels, Wear, Vol. 268, pp. 202-207, 2010.
[13] Ervina Efzan M. N., Vigram Kovalan K. and Suriati G., A review of welding parameter on corrosion behavior of Aluminum, Int. J. Eng. Appl. Sci., Vol. 1, No.1, pp. 17-22, 2012.
[14] Afolabi A.S., Effect of Electric Arc Welding Parameters on Corrosion Behaviour of Austenitic Stainless Steel in Chloride Medium, AU J.T., Vol. 11, No. 3, pp. 171-180, 2008.
[15] Gill T. P. S. and et al., Effect of Heat Input and Microstructure on Pitting Corrosion in AISI 316L Submerged Arc Welds, Corrosion Science, Vol. 44, No. 8,pp. 511-516, 1988.
]16[ سبزی م.، معینی‌فر ص. و نجفی‌بیرگانی ا.، بررسی تأثیر حرارت ورودی بر رفتار خوردگی اتصالات جوش فولاد هادفیلد در فرآیندSMAW ، مجله علوم و فناوری جوشکاری ایران، سال اول، شماره 1، ص 23 - 13، پاییز و زمستان 1394.
]17[ ترحم‌نژاد م. ع.، دهملائی ر. و معینی‌فر ص.، بررسی تأثیر حرارت ورودی فرآیند GTAW بر خوردگی اتصالات جوش فولاد زنگ نزن دوفازی 2205، مجله مواد نوین، دوره 5، شماره 1، ص. 110- 95، 1393.
[18] Mendez J. and et al., Weldability of austenitic manganese steel, Journal of Materials Processing Technology, Vol. 153-154, pp. 596-602, 2004.
[19] Curiel-Reyna E. and et al., Influence of cooling rate on the structure of heat affected zone after welding a high manganese steel, Materials and Manufacturing Processes, Vol. 20, pp. 813-822, 2005.
[20] Curiel-Reyna E. and et al., Effect of carbide precipitation on the structure and hardness in the heat-affected zone of Hadfield steel after post-cooling treatments, Materials and Manufacturing Processes, Vol. 23, No. 1,pp. 14-20, 2007.
]21[ سبزی م.، معینی‌فر ص. و نجفی‌بیرگانی ا.، بررسی تأثیر نرخ سرد شدن بر رفتار خوردگی منطقه ذوب اتصال جوشکاری فولاد هادفیلد، شانزدهمین کنگره ملی خوردگی، تهران، پژوهشگاه صنعت نفت، ص. 10-1، آذر 1394.
[22] Annual book of ASTM 128 A / 128 M, Standard specification for steel castings, austenitic manganese, Engineered Casting Solutions Since, Vol. 1, pp. 1-3, 1980.
[23] Annual book of AWS standards, Standard Welding Procedure Specification, Shielded Metal Arc Welding of Carbon Steel, AWS International, 2005.
[24] Annual book of AWS standards, Welding Science and Technology, 9th Edition, Vol. 1, 2015.
[25] Lim M. L. C., Kelly R. G. and Scully J. R., Overview of Intergranular Corrosion Mechanisms, Phenomenological Observations, and Modeling of AA5083, Corrosion, Vol. 72, No. 2, pp. 198-220, 2016.
[26] Lee Y. K. and Choi C. S., Driving force for γ→ε martensitic transformation and stacking fault energy of γ in Fe-Mn binary system", Metall. Mater. Trans. A, Vol. 31, No. 2, pp. 355-360, 2000.
[27] Cao F., Shi Z., Song G. L., Liu M., Dargusch M. S., Atrens A., Influence of hot rolling on the corrosion behavior of several Mg–X alloys, Corrosion Science, Vol. 90, pp. 176-191, 2015.
)