[1] Singh VK, Talukdar P, Comparisons of different heat transfer models of a walking beam type reheat furnace, International communications in heat and mass transfer, 2013,47,20-6.
[2] Han SH, Baek SW, Kim MY, Transient radiative heating characteristics of slabs in a walking beam type reheating furnace, International Journal of Heat and Mass Transfer, 2009,52(3-4),1005-11.
[3] Morgado T, Coelho PJ, Talukdar P, Assessment of uniform temperature assumption in zoning on the numerical simulation of a walking beam reheating furnace, Applied Thermal Engineering, 2015,76,496-508.
[4] Torres M, Colás R, A model for heat conduction through the oxide layer of steel during hot rolling, Journal of Materials Processing Technology, 2000,105,258-63.
[5] Venturino M, Rubini P., Coupled fluid flow and heat transfer analysis of steel reheat furnaces, 3rd Eur. InConf. Ind. Furn. Boil., no 1995 Apr (p. 8).
[6] Kim JG, Huh KY. Prediction of transient slab temperature distribution in the re-heating furnace of a walking-beam type for rolling of steel slabs. ISIJ international. 2000 Nov 15;40(11):1115-23.
[7] Mäki AM, Österman PJ, Luomala MJ, Numerical study of the pusher-type slab reheating furnace, Scandinavian Journal of Metallurgy, 2002,31,81-7.
[8] Harish J, Dutta P, Heat transfer analysis of pusher type reheat furnace, Ironmaking & Steelmaking, 2005,32(2),151-8.
[9] Jang JH, Lee DE, Kim MY, Kim HG, Investigation of the slab heating characteristics in a reheating furnace with the formation and growth of scale on the slab surface, International Journal of Heat and Mass Transfer, 2010,53(19-20),4326-32.
[10] Singh VK, Talukdar P, Coelho PJ, Performance evaluation of two heat transfer models of a walking beam type reheat furnace, Heat Transfer Engineering, 2015,36(1),91-101.
[11] García AM, Amell AA, A numerical analysis of the effect of heat recovery burners on the heat transfer and billet heating characteristics in a walking-beam type reheating furnace, International Journal of Heat and Mass Transfer, 2018,127,1208-22.
[12] García AM, Colorado AF, Obando JE, Arrieta CE, Amell AA, Effect of the burner position on an austenitizing process in a walking-beam type reheating furnace, Applied Thermal Engineering, 2019,153,633-45.
[13] Rong W, Li B, Qi F, Performance evaluation of a walking beam type reheating furnace based on energy and exergy analysis, Thermal Science, 2021, 25(6 Part B):4749-60.
[14] Singh S, Kumar V, Ghose P, Computational Modeling of Walking Beam Type Reheat Furnace for the Prediction of Slab Heating and Scale Formation, ASME Journal of Heat and Mass Transfer. 2024;146(1).
)